Accessories: Turbine Enclosures
Non-Sealed FRP (NTE) Turbine Enclosure
The Non-Sealed (NTE) Turbine Enclosure body is mounted on the tank collar. If a leakproof joint is required, cement the enclosure body to the tank collar using the adhesive kit (Kit AD). (It is recommended that the joint always be cemented.) All turbine enclosures are supplied with adhesive kits.
A minimum 36" diameter street box is required with all FRP models to allow the removal of the FRP lid after the turbine enclosure is installed. This also allows the removal of the manway cover.
To leak test the turbine enclosure, use a standing water test. DO NOT use an air pressure test.
NTE Features
- Friction fit lid to repel water from above
- FRP enclosure body (variable length in 12" increments, 42" or 48" ID’s)
- FRP reducer (42"x30" or 48"x30" ID’s)
- Loose fit FRP lid (32.5" OD) with handle
- Enclosure body is field cemented to the tank collar using the supplied adhesive kit (Kit AD)
- Reducer and the lid fit over the enclosure body with a loose fit
- 30" opening allows for the removal of a 22" manway lid (28" OD)
